Fiber laser cutting machines are used more and more widely, and other related precautions also need to be understood. Today Ander Laser will talk to you about the precautions for shutting down the equipment of fiber laser cutting machines.
1. Please follow the steps below to turn off the device:
1. Turn off the main valve switch of the nitrogen cylinder and oxygen cylinder (if there is an air compressor, turn off the power supply of the cold dryer, the main power supply of the air compressor host, and the main gas circuit switch in sequence), and press the manual blower to discharge the gas in the pipe. over.
2. Start the Baichu cutting software and click to return all to the origin. And seal the bottom of the nozzle with textured paper to prevent dust from entering.
3. Turn off the laser power, chiller power, and equipment main power in sequence.
2. Chiller protection measures:
Please be sure to drain the cooling water of the laser and chiller cleanly to prevent the cooling water from freezing and damaging the equipment during shutdown. Even the antifreeze must be drained cleanly, because most antifreeze contains corrosive components and it is not recommended to store it in the equipment for a long time;
3. Chiller drainage method:
Remove the water pipe at the water inlet from the chiller, and then use compressed air to ventilate the water inlet (WATERIN) until the residual water in the chiller is blown out.
4. Laser drainage method:
Remove the water pipe at the water inlet from the laser, and then use compressed air to ventilate the water inlet (WATERIN) until the residual water in the water cooling pipe inside the laser is blown out from the water outlet. Then plug the water inlet and outlet with water pipes (or rubber plugs) to prevent dust from entering the water pipes.
Ander Laser Intelligent Equipment (Guangdong) Co., Ltd. is a laser equipment manufacturer integrating R&D, production and sales. Its main products are: laser cutting machines, laser marking machines, laser welding machines and laser equipment peripheral automation, etc. series, involving more than 100 kinds of industrial laser equipment and its supporting products; strictly in accordance with the requirements of the ISO9001 quality control system, product quality is fully controlled, and multiple series of products have obtained EU CE certification. We look forward to your cooperation and understanding.